Materials Needed:
54902013 2 inch gold eye pin
54902061 3-Strand gold toggle
54902043 Gold small link chain
54902041 Gold large link chain
5490411 Amber acrylic bead mix
5490427 8mm Satin pearl mix metals

Tools Needed:
Needle Nose Pliers #4454
Round Nose Pliers #4458
Wire Cutters #4457

Techniques to Know:
Form a Loop
Jump Rings

Instructions:
1. Cut a 40 link length of the large chain for the back
of the necklace. Carefully open and re-close end
links to attach the bar half of a toggle clasp to
each end of the chain.
2. Cut a 20 link length of the large chain for the
center of the necklace. Carefully open and reclose end links to attach the chain to the innermost
rings on two circle halves of the toggle clasps (see
diagram).
3. Create the beaded links as shown. Thread the bead
onto an eye pin and form a loop. Open end loops
to connect the beaded links to form a beaded
chain. Open end links to also connect the beaded
chain to the center loops on the circle halves of the
toggle clasps.
4. Cut a 76 link length of the smaller chain. Carefully
open and re-close end links to connect the chain
to the end loops on the circle halves of the toggle
clasps.