Supplies:
54902001 Silver Ear Wire
54902010 2 inch Silver Headpin
5490427 8mm Satin Pearl Mix Metals
54902020 4mm Silver Open Jump Ring

Tools Needed:
Needle Nose Pliers #4454
Round Nose Pliers #4458
Wire Cutters #4457

Techniques to Know:
Form a Loop
Jump Ring

Instructions:
1. Link 9 jump rings together to form a short chain and attach this to the bottom of an ear wire. Repeat for the matching earring.
2. Create the drops as shown. For each drop, thread the bead onto a head pin and form a loop. Make 2 sets of drops.
3. Carefully open and close top loops to attach the drops along the short chains as shown on the diagram.