Supplies:

54902042 Silver small link chain

54902056 Silver large round toggle

54902012 2 inch Silver eyepins

3202002 7-Strand silver beading wire

5490427 8mm Satin pearl mix metals

5490454 Black/smoke glass bead mix

Tools Needed:

Needle Nose Pliers #4454

Round Nose Pliers #4458

Wire Cutters #4457

Crimp Tool (optional) #4501

Ruler

Techniques to Know:

Form a Loop

Jump Rings Crimping

Instructions:

1. Cut (2) 48 link (approx. 61/2”) pieces of chain. Use a jump ring to attach one half of the toggle clasp to each chain end.

2. Create the beaded links as shown on the diagram. For each link thread the bead(s) onto an eye pin and form a loop. Carefully open and close end loops to connect the links together into a beaded chain as shown. Open end loops again to attach the beaded chain to the side chain links as shown.
3. Cut a 15” piece of beading wire. Use a crimp to attach the wire to one end chain link side. Thread on the beads as shown. Use a crimp to secure the strand to the other end chain link side.

Skill Level: Beginner; No Jewelry Making Experience Needed
Approximate Crafting Time: 30 minutes