Supplies:

2 pks 2949409 Sterling Elegance® 4mm Open Jump Rings
1 pk 2949419 Sterling Elegance® Silver Link Chain
1 pk 2949427 Sterling Elegance® Small Ball Hook Wire
1 pk 29494108 Sterling Elegance® Twisted Double Link Chain
1 pk 4949419 Platinum Elegance® Link Chain
1 pk 4949472 Platinum Elegance® 35mm Eye Pins
1 pk 3949419 Rose Gold Elegance® Link Chain
1 pk 2949732 Gold Elegance® Cable Chain #1

Tools Needed:
Needle Nose Pliers
Round Nose Pliers
Wire Cutters

Techniques to Know:
Form a Loop

Instructions:
1. Cut the chains as indicated in the diagram. Cut four sets of each chain length except the center set, cut only two sets of those chains.
2. Slide the jump rings onto the eye pin in to form a peak at the bottom as shown.
3. Finish the end of the eye pin with a loop.
4. Using your thumb, carefully bend the eye pin to form a slight curve.
5. Use 4mm jump rings to connect the earring wire and chains as shown.