Materials:
Silver Eye Pins
Silver 4/6mm Jump Rings
Silver Toggle Clasp
Tools Needed:
Needle Nose Pliers
Round Nose Pliers
Wire Cutters
Techniques to Know:
Instructions:
1. Cut (2) 8 3/4” lengths of silver chain.
2. Use 4mm jump rings to attach a toggle clasp end to one end of each chain.
3. Cut (4) 3 1/2” lengths of gunmetal chain (approximately 17 links).
4. Make 27 beaded links.
5. Use 4mm jump rings to attach a gunmetal chain length to the silver chains from step 1.
6. Attach a beaded link to every other link along the chain, starting with the first link. There should be a total of nine links attached.
7. Connect the other end of the beaded links to a second gunmetal chain length. The bead links should attach to every other link along the chain.
8. Attach the next nine bead links to the second chain. Connect the other end of the links to the third gunmetal chain length. Attach the last set of nine links to the third chain and connect the other end to the fourth chain.
9. Cut (18) 2 3/8” lengths of white chain and (9) 2 3/8” lengths of silver chain.
10. Use 6mm jump rings to gather the chains into nine groups of two white chains and one silver chain.
11. Attach the jump rings along the bottom gunmetal chain, alternating every other link.